⎝⎛欢乐拼三张⎞⎠

成都智安周界科技有限公司,成都电子围栏厂家,成都张力围栏厂家,成都泄漏电缆厂家,定位型振动光缆厂家,定位型振动光纤报警系统厂家,生物静电感应电缆厂家 Welcome to Chengdu Zhi'an Perimeter Technology Co., Ltd., Chengdu Electronic Fence Manufacturer, Chengdu Tension Fence Manufacturer, Chengdu Leakage Cable Manufacturer, Positioning Type Vibration Cable Manufacturer, Positioning Type Vibration Fiber Alarm System Manufacturer, Biostatic Induction Cable Manufacturer
028-64374007 0757bh.com

Product Categories

contact us

Mr. Chen: 18010691723

Phone: 028-64374007

363412969@qq.com Email: 363412969@qq.com


Address: No. 1509, Xilian Iron and Steel Building, 866 Xingchuan Road, Jinniu High-tech Industrial Park, Chengdu, Sichuan Province


Vibration cable ZAZJ-W2-Z series

Z series-vibration cable

Release time: 2018-09-21 20:50

Vibration cable perimeter detection system


Product introduction


Vibration cable is suitable for all kinds of complicated terrain, not restricted by terrain height, twists and turns, no dead angle, vibration cable can be fixed on the fence fence with a certain strength according to the contour of the perimeter, hidden installation, can work all day, without The influence of sunlight, temperature, rain and fog and other factors, low false alarm rate, strong anti-interference ability, not affected by climate, plants, small animals and other factors; no false alarms under severe weather conditions such as rain, snow and low temperature.
It is mainly applicable to the outer fences of important places such as banks, factories and mines, natural gas stations, oil depots, villas, prisons, museums, power stations (including nuclear power stations), and military bases to achieve effective security precautions.


working principle


The system is composed of a detector and a special sensing cable. The vibration cable is composed of a core wire, a polymer pressure-sensitive film, a shielding layer, and a jacket. The characteristics of the cable are sensing pressure and deformation. The cable is installed on the attachment according to a straight line or a curve. When the cable is subjected to weak pressure or deformation, the cable outputs a weak signal of a certain amplitude and frequency. The detector senses the signal and judges it. When the set requirements are met, the detector immediately alarm .


Features


1. As the vibration cable is passively distributed, it is particularly suitable for use in special places where flammable and explosive sources are not suitable for power supply.

总线远传功能,普通两芯信号线可长达10KM 。 2, CAN bus remote transmission function, ordinary two-core signal line can be up to 10KM .

3. The alarm response speed is fast. When the fence is invaded or the vibration cable is damaged, the control panel alarm host immediately alarms.

4. Zone address setting, the detector can set the zone address quickly and arbitrarily.

5. Intelligent display, showing the detector's running status, pulse voltage value, working mode, alarm status, etc.

6. Compatible with all alarm hosts that accept switching signals to achieve multiple functions such as remote networking.



Technical Parameters


product name

Vibration cable detector

Product number

ZAZJ-W2-Z1 / Z2

Communication mode

总线通讯 CAN bus communication

Alarm method

摇晃/断线/断电/短路/防拆 Vibration / shake / disconnection / power failure / short circuit / anti-disassembly

Sensitive threshold

64 stops

Anti-interference threshold

4 1 to 4 steps

Alert length

米(电缆长度) 400 meters (cable length)

working environment

℃~ +70 ℃, 095%相对湿度、无冷凝 -40 ℃ to +70 ℃, 0 to 95% relative humidity, non-condensing

警号 Sound and Light / Sirens

防区报警独立输出DC12V Support , zone alarm independent output DC12V

Power supply

240V/DC12V/蓄电池12V7AH AC110 240V / DC12V / Battery 12V7AH

Power consumption

15W

Specifications

300 × 200 × 100mm / 2Kg

Linkage compatible

报警开关量独立输出(常开/常闭任选),联动控制LED探照灯/地址模块等其它报警设备 Support , alarm switch independent output ( normally open / normally closed optional ), linkage control LED searchlight / address module and other alarm equipment

Cable specifications

φ 4mm外层抗紫外线 Outer diameter : φ 4mm

Cable weight

米约10KG 400 meters about 10KG

Installation method

/S/C/一字型 M / S / C / Slot

Cable feeder

米,馈线与探测器BNC接口连接 Standard length of 3 meters, the feeder is connected to the BNC interface of the detector

Installation Environment

All kinds of fences and fences built by iron mesh, iron art, plastic steel, brick wall, etc.

 

Vibration cable perimeter detector dual zone installation diagram

Previous product : Vibration cable
Next Product : Z Series-Vibration Cable Network Type
Ranch 欢乐拼三张 im体育娱乐 真人游戏平台注册 七乐彩